Amana Appliance Specialists
Amana Appliance Repair in Groveland, FL
Amana appliances are built to be simple and dependable, which is why they show up in so many Groveland homes and rentals. When yours stops doing its job, we find the cause, explain it clearly and put the price in writing before any work starts.
What We Cover
When Your Amana Appliance Stops Keeping Up With Daily Life
Amana has always focused on straightforward, practical appliances rather than long feature lists. You’ll find many top-load washers with agitators, basic electric dryers, bottom-freezer and top-freezer refrigerators, and ranges with standard controls.
Simpler design usually means fewer places for something to go wrong, and in many cases a more affordable repair. It doesn’t mean every Amana is built the same, though. Designs vary by product line and model year, so we start with your model number instead of assuming anything.
One note: Amana heating and air conditioning equipment is made by a separate company. This page covers Amana kitchen and laundry appliances.
Your Refrigerator Isn't Keeping Food Cold
Leftovers spoil sooner than they should, drinks never feel properly chilled, or the freezer drawer has gone from frozen solid to just firm.
Laundry Cycles Aren't Finishing Properly
The washer stops with water still in the tub, skips the spin, or leaves clothes heavy and dripping when you pull them out.
Your Dryer Is Running Without Doing the Job
The drum turns and the timer counts down, but the load is still damp. Sometimes the cabinet barely feels warm.
Cooking Appliances Aren't Heating Consistently
The oven takes a long time to preheat, bakes unevenly, or a burner on your stove has stopped heating up.
Water, Noise or Error Codes Have Started Appearing
A puddle where there wasn’t one before, a new rattle or hum, or a code on the display that keeps coming back.
Know What an Amana Repair Costs Before We Start
Our diagnostic visit is $79, and we waive it when you approve the repair. You get the price in writing first, so nothing on the invoice is a surprise.
Pick Your Appliance
Amana Appliances We Repair
Amana Refrigerator Repair
Top-freezer, bottom-freezer and side-by-side models that run warm, frost up or leak.
Amana Washer Repair
Top-load washers that won’t fill, drain, agitate or spin, and lids that won’t lock.
Amana Dryer Repair
Electric and gas dryers with little heat, a still drum or a squeal on every load.
Amana Dishwasher Repair
Dishwashers that leave standing water, dirty dishes or a wet floor.
Amana Oven Repair
Ovens that won’t heat, run off temperature or shut off before the food is done.
Amana Stove & Range Repair
Electric coil, smooth-top and gas ranges with dead burners or ignition trouble.
Amana Freezer Repair
Chest and upright freezers, including the extra freezer in the garage.
Amana Microwave Repair
Over-the-range and countertop microwaves that hum without heating.
Early Warnings
Don't Ignore These Amana Appliance Warning Signs
Amana appliances often keep working for a while after a part starts to fail. That can make problems easy to miss. These signs mean it’s time to have a closer look.
Call (352) 562-0907The refrigerator feels warmer by the day
Gradual warming often means the cooling system is having a harder time, not that it has already failed.
A damp spot that keeps coming back
You wipe it up, and a day later it’s back. Hidden leaks can damage flooring and cabinets without showing up right away.
A knock, squeal or hum you haven’t heard before
Pay attention to when the noise happens. Spin, startup and tumbling noises point to different parts.
A hot or burning smell
Stop using the appliance and switch it off. This one shouldn’t wait.
Breaker trips when the appliance runs
Leave the breaker off and call for service. A shorted part or damaged wire needs to be checked by a professional.
Lights or codes that won’t clear
A single reset is fine. If the code or light comes back, the fault is still there.
Symptoms We See
Amana Refrigerator Repair for Cooling & Temperature Problems
Temperature trouble in an Amana refrigerator usually comes from one of three places: the sealed cooling system, the fans that move cold air, or the defrost system that keeps the coils clear. Each needs a different fix, so we test before replacing anything.
Fresh food section running above 40°F
We check condenser coil airflow, the fans and whether cold air is reaching the fresh food section from the freezer.
Freezer soft but still running
Frost on the evaporator is common and can block airflow completely. We look for the defrost problem behind it.
Food freezing on the top shelf
A damper, thermistor or temperature control may be letting in too much cold air. We check the controls before replacing anything.
Water under the crisper drawers
Usually a blocked defrost drain, sometimes a gasket that no longer seals. We clear the drain and find what caused it.
Ice maker stopped producing
Low water pressure, a failing inlet valve, a frozen fill tube and the ice maker itself are all possible causes.
Runs almost constantly
In a Florida summer, some extra run time is normal. If it never stops, we check the coils, door seals and fan speed.
While you wait for a visit, keep the doors closed, check that nothing is blocking the vents inside, and move the most perishable food to a cooler if the temperature keeps rising.
Symptoms We See
When Your Amana Washer Can't Finish Laundry Day
Many Amana washers are traditional top loaders, though newer models have more electronic control. When a cycle stalls, we look at where it stops: fill, agitation, drain or spin.
Don’t reach into the tub or try to force the lid while the washer is running or has water in it.
Schedule Amana Washer RepairSlow fill or no water
Check that both taps behind the washer are fully open. If they are, we inspect the inlet valve screens, which can clog over time from Groveland’s hard water, and then test the valve itself.
Agitator not moving
The motor may run while the agitator stays still. That points to the drive system, but we confirm it before quoting a repair.
Water left in the tub
Something may be blocking the drain path, the hose could be kinked, or the pump may have failed.
No spin or a weak spin
The lid has to lock and the water has to drain before the washer will spin. We work through those checks first.
Lid won’t lock or the cycle stops
The lid switch or lock tells the washer it’s safe to run. When it fails, the washer stops to protect itself.
Leaking or walking across the floor
A loose hose, worn tub seal or suspension issue can cause leaks and movement. We level the machine and then trace the source.
Symptoms We See
Amana Dryer Problems That Leave Clothes Damp
Damp clothes can come from a dryer that isn’t making enough heat or one that can’t get rid of moist air. Each needs a different repair, so we start by figuring out which one it is.
Cool air only
On electric models, we look at the heating circuit and its safety fuses. On gas models, we check the ignition system and gas valve.
Warm but slow
A restricted vent line is the most common cause. It lengthens drying time and forces the dryer to run hotter.
Drum not turning
A broken belt, a worn idler or a failing motor. The sound it makes helps us narrow it down.
Shuts off early
An overheating safety limit may be tripping. We look for what’s causing the heat instead of just replacing the part.
Squeal, thump or scrape
Worn drum rollers, drum glides or a coin caught at the drum seal are common causes.
No response at all
We test the door switch, start circuit and thermal fuse, then check the power supply at the outlet.
Have the full vent run cleaned once a year. It improves drying time and reduces fire risk from lint buildup.
Symptoms We See
Amana Dishwasher Trouble Starts With the Small Signs
Dishwasher problems usually start small. Cups get a film, the bottom rack stays wet, or there’s a little water left after the cycle. Catching these early can keep them from turning into a leak or a pump replacement.
Film on glasses
Hard water, a low rinse aid level or a heater that isn’t getting the water hot enough can all leave residue.
Standing water after the cycle
We check the filter, the drain hose, the air gap or disposal connection, and then the pump.
Food left on upper racks
Blocked spray arm holes or low water pressure can keep water from reaching the top rack.
Door that has to be pushed hard
A worn latch or bent strike can prevent the dishwasher from starting.
Drips at the lower edge
A worn door gasket, a unit that isn’t level or loose connections underneath.
Symptoms We See
Get Consistent Heat Back to Your Amana Oven & Range
Amana ranges come in electric coil, smooth-top and gas models. Each heats differently, so the same symptom can have a different cause on each type.
Oven won’t reach temperature
We check the bake and broil elements or the gas igniter, then the temperature sensor and control.
Cakes rise unevenly
We test the actual oven temperature with our own meter and compare it to the setting before making any adjustments.
A coil burner stays cold
We check the coil, the receptacle it plugs into and the switch behind the knob one at a time.
Smooth-top zone not heating
Usually the element under the glass or its control switch. Keep using the other zones only if the glass isn’t cracked.
Gas burner won’t light
A dirty igniter or a burner cap that isn’t seated properly. If you smell gas, leave the house and call your gas provider from outside first.
Clock or keypad not responding
Worn keypads, loose connectors and failed controls can look similar. We test which one it is.
What Usually Fails
What Might Be Behind the Problem?
Several parts can cause the same symptom. These are the components we test on Amana appliances, and we confirm the problem before replacing anything.
Pumps
Drain pumps in washers and dishwashers. A jammed impeller and a worn motor can cause the same symptom.
Motors
Drive motors turn the drum or agitator. Fan motors move air through refrigerators and ovens.
Heating elements
Used in ovens, electric dryers and some dishwashers. We check resistance to confirm whether the element has failed.
Sensors
Thermistors and thermostats report temperature to the controls. An inaccurate reading can make a good part look faulty.
Fans
Evaporator and condenser fans keep a refrigerator cool. A slow fan can look like a cooling system failure.
Water inlet valves
They control water into washers, dishwashers and ice makers. Scale buildup is common in Lake County homes.
Switches and latches
Lid switches, door latches and start switches tell the appliance it’s safe to run.
Electronic controls
We test controls last, after the parts they operate have checked out.
Reading The Display
Amana Error Codes Can Point Us in the Right Direction
Some Amana appliances show codes on a display. Others use flashing lights, and many older models don’t show codes at all.
The same code can mean different things
- A code on a washer, dishwasher and range may point to different problems. Model year can change the meaning too, so we look it up by your exact model.
Codes point to a system
- A code usually tells us which system has a problem, like drainage or heating. We still need to test the parts to find the cause.
When to reset and when to stop
- If a code appears after a power outage, one reset is reasonable. If it returns, it’s time for a service visit.
Save the code before it clears
- Take a photo of the display or note the flash pattern before you turn anything off.
A Few Minutes Now
A Better Diagnosis Starts With a Few Simple Details
You don’t need tools for this. A few notes before the visit can help us find the problem faster.
Model and serial number
Look inside the door or lid, along the fridge wall or behind the range drawer. A photo of the tag works well.
Codes or flashing lights
Write down the code exactly as shown, or count the flashes.
When it started
Did it start after a storm, a move or an unusually large load? Let us know if it happens every time or only now and then.
What you notice
Tell us where water appears, when the noise happens and whether you smell anything unusual.
Access to the appliance
Clear enough space around the appliance so the technician can work safely.
Start To Finish
How We Track Down an Amana Appliance Problem
Every Amana repair follows the same steps, from your first call to a final test run.
- 1
Start With Your Description
We ask about the symptoms, timing and model before we arrive.
- 2
Look Before We Test
We check the hoses, vents, seals and wiring for anything obvious.
- 3
Confirm the Cause
We test the related parts until the results point to one cause.
- 4
Agree on the Repair
You get the price in writing before we begin.
- 5
Run It Again
We run the appliance after the repair to make sure it’s working properly.
Honest Advice
Is Your Amana Appliance Still Worth Repairing?
Amana appliances usually cost less to buy new, so the repair has to make sense. Here’s how we look at it with you.
- 01
Weigh the repair against a new unit
Compare the quote with the full cost of a similar Amana, including delivery, installation and removal of the old one.
- 02
Consider its age
A newer appliance with one failed part is usually worth repairing. An older one may not be, depending on the part.
- 03
Look at its repair history
A first repair is different from a third repair in the same year.
- 04
Check parts availability
Many Amana parts are still easy to find. If a part is hard to get or discontinued, we’ll tell you before you decide.
- 05
Look at the overall condition
Rust, a cracked tub or a damaged liner can change the decision, even if the current repair is minor.
Fewer Call-Outs
Simple Habits That Can Help Your Amana Appliances
These habits take a few minutes, need no tools and are safe to do yourself.
Load the washer evenly
Spread heavy items around the agitator so the drum stays balanced during the spin cycle.
Clear the lint screen every load
It takes a few seconds and helps keep air moving through the dryer.
Leave space around the refrigerator
Leave a small gap at the back and sides so heat can escape, especially in a warm garage.
Rinse the dishwasher filter
Your manual shows where the filter is and how often it needs cleaning.
Wipe down door gaskets
Clean refrigerator and dishwasher seals regularly so they can close tightly.
Wipe up oven and cooktop spills
Clean spills once the surface has cooled so residue doesn’t build up on the elements or burners.
Who We Help
Amana Appliance Repair for Groveland Homes & Properties
Amana is a popular choice for rentals and investment properties because it’s affordable and simple to use. We work with owners as well as the people managing those homes.
Family homes
Kitchen and laundry repairs scheduled around your day.
Rental houses
We can meet your tenant at the property and send you a written summary of what we found.
Apartments and condos
Compact and stacked units in small spaces. We confirm access and parking before we arrive.
Property managers
When you have several service calls, we try to group visits by area.
Offices and small businesses
Break room refrigerators and microwaves serviced around your business hours.
Where We Work
Amana Appliance Repair Near Groveland
Our team is based in Groveland and regularly handles Amana repairs in nearby communities. We serve Clermont homes near the lakes and along US-27, provide appliance repair for Minneola homeowners, and cover Mascotte along State Road 50.
Answers Before You Book
Amana Appliance Repair Questions From Groveland Homeowners
Have another question? Call (352) 562-0907 and tell us what is going on with your appliance.
My Amana refrigerator is running but not cooling. What could cause that?
Dirty condenser coils, a fan that isn’t moving air or frost blocking the evaporator are common causes. A sealed-system issue is less common, but we test for it before recommending any repair.
Why is there water left in my Amana washer?
Check that the drain hose isn’t kinked behind the machine. If the hose looks fine, turn the washer off and schedule a visit. A blocked drain path or failed pump needs a technician.
Why won’t my Amana washer spin?
The washer needs to drain and lock the lid before it can spin. A spin problem can start with a drain issue, a faulty lid switch or a drive system problem.
Why is my Amana dryer running without heat?
On electric dryers, the element or a safety fuse may be at fault. On gas dryers, it could be the ignition system. A blocked vent can also trip the safety devices, so we check airflow too.
What should I do if my Amana dishwasher won’t drain?
If the filter is easy to reach, rinse it by following your owner’s manual. If water still stays in the tub, we’ll check the drain hose, air gap or disposal connection, and the pump.
Why isn’t my Amana oven heating?
Electric ovens usually trace back to the element, sensor or control. Gas ovens often point to the igniter or valve. Because different parts can cause the same problem, we test before replacing anything.
What does my Amana error code mean?
Code meanings vary by appliance and model. Send us the code and model number, and we’ll tell you what system it relates to. The exact cause needs to be confirmed during the visit.
Where is the model number on my Amana appliance?
Check inside the refrigerator or dishwasher door, under the washer lid, around the dryer door opening or behind the range storage drawer.
Is my Amana appliance worth repairing?
Often, yes, especially when the problem involves a single part. We’ll give you a written quote, and if replacement makes more sense, we’ll tell you.
Do you repair Amana appliances outside Groveland?
Yes. We serve Groveland and nearby South Lake County communities, including Clermont, Minneola, Mascotte and Howey-in-the-Hills.
Customer Reviews
What Our Customers Say About Ramson Appliances
4.9 out of 5 stars from 355 Google reviews
- Carmine51
a year ago
Rafael is an Awesome Tech, knows his stuff and explained exactly what needs to be to be done. 100% professional and I will recommend to anyone who needs a trusted a friendly experience…. RAMSON APPLIANCES is without a doubt the best company I have ever had the pleasure to deal with. Thanks so much for a fast response to our call for help! 👍
- Frank Hernandez Jr.
a year ago
Raphael was professional, knowledgeable, polite and courteous. He showed up at the scheduled time, and explained everything he was doing to me. The entire experience was outstanding. I will be using his services again. God bless 🙏
- Desiree Carter
3 years ago
I used Ramsom Appliances to install a dishwasher that I was gifted. My installer, Rafael, was knowledgeable, professional, and overall a pleasure to have for this job. The dishwasher is level, he made sure the water line was installed at the right angle to prevent a backup in the flow of things. The attachment to the garbage disposal was perfect with no leaks afterwards. The front office staff, Ms. Vanessa was also very nice and professional and was able to schedule my service appointment for the next day, which I was very happy about that. I highly recommend RAMSON Appliances. I will use them in the future.
- Christine Stewart
a year ago
Great experience. Scheduling appointment was easy. They gave a heads up via text when they were on the way and they were on time...answered all my questions and gave me a whole education about what was wrong with my refrigerator and how much parts and labor would cost to get to the bottom of it. There were no sleazy tactics to just get my money. Straight up, honest service. I will call again when needed and refer to anyone who needs appliance service.
- Steve Tollerton
a year ago
Easy to contact, quick appointments. The refrigerator lights fix was more difficult than anticipated and took 2 service calls but the tech followed up quickly and i was only billed for the additional parts, not 2 calls. This is the 3rd time we’ve used Ramson and still very satisfied.
Reviews from Google